Sterilizer Dry-heat cabinet, SM-360C

The SM-360A nursery is designed to sterilize nail, pedicure, hairdressing and cosmetology tools. It is suitable for use in both beauty salons and at home. The inner unit of the thermal sterilizer is made of stainless steel. The grooming cabinet has a special removable container for storing and sterilizing tools. The sterilizer is equipped with all the necessary functions for high-quality treatment and disinfection. The tool hustler has a timer with modes from 0 to 60 minutes, which allows you to control the time of sterilization and notifies the beep about the end of the procedure. Time is determined depending on the degree of contamination and the material of the tools. Also, the dry heat for manicure is equipped with a temperature regulator + a work indicator light bulb, with which it will be possible to adjust the necessary temperature regime for sterilization. Available temperature: from 0 to 220°C. The temperature is determined depending on the material from which the manicure tools are made. A tool sterilizer works by circulating hot air flow inside the chamber. Kraft packages in this model ‘do not burn’ when following the following recommendations: it is better to lay down tools after the heating occurs and the temperature stabilizes, usually it takes up to 10 minutes; the first time you need to lay down craft packages without a tool at 180 degrees, then adjust the temperature if necessary to choose the best one for the procedure. When you first start, a manicure sterilizer can make a smell – that’s fine, there won’t be any at the next turns. Disinfection of nail tools, as well as cosmetology and hairdressers, is a mandatory procedure in the field of care and beauty industry.

Specifications: Housing material: metal and plastic Voltage: 220-240 In Power: 300W Volume: 2.6L Frequency: 50Hz Temperature: 0 to 220°C Timer: 0 to 60 minutes Dry heat size: 23cm22cm15cm Internal unit size: 21cm15cm6cm Cord length: 87cm